Introduction: Venom Snake Automaton: [ 16. FEET, PLATFORM, AND BASE ASSEMBLY (G15 AND G16) ]
Step 1: G15 Parts
Step 2: G15 Assembly (Part 1)
Step 3: G15 Assembly (Part 2)
Step 4: G15 Assembly (Part 3)
Step 5: G15 Assembly (Part 4)
Step 6: G15 Painting Guide
TIP: Use varnish to protect the paint of the platform and the boot's outsole.
Step 7: G15 Assembly (Part 5)
WARNING: Be careful when turning the crank, it may get stuck because it is not fully constrained yet. If it gets stuck don't force it, align the misaligned parts, turn the crank ¼ of rotation the opposite direction, and try again.
Step 8: G15 Assembly (Part 6)
Step 9: G16 Parts
Step 10: G16 Assembly (Part 1)
Step 11: G16 Painting Guide
TIP: Use varnish to protect the paint of the base.
Step 12: G16 Assembly (Part 2)
Please, use the base to hold the automaton while turning the crank.
Support me on Patreon so I can design more: www.patreon.com/soludus
Software used for the creation of the automaton:
- Daz Studio
- Fusion 360
Software used for the instructable:
- Google Docs