The Monobox Amp

Introduction: The Monobox Amp

I just completed my version of the Monobox Amp project from Make Magazine issue 34. First off, it was fun, but you'll defiantly need to know what your doing if you attempt this project. I actually made a mistake when I made mine, soldered a jumper wire from pin 5 after the capacitors to pin 8. However it still works, and why fix what aint broke right? So without further delay, here are some pictures and a video of the completed project. Please ask any questions if you have any, I'll try to answer them.



Link to video should the embed code fail you: http://youtu.be/EeerIsO8OuA
 & here is the link to the make project video: http://youtu.be/zQ4KsTOj_No
DIY Soundhack Contest

Participated in the
DIY Soundhack Contest

Battery Powered Contest

Participated in the
Battery Powered Contest

Be the First to Share

    Recommendations

    • Rice & Grains Challenge

      Rice & Grains Challenge
    • Lamps Challenge

      Lamps Challenge
    • Puzzles Challenge

      Puzzles Challenge

    2 Comments

    0
    aalejo
    aalejo

    8 years ago on Introduction

    i want to know if 5v 1000mah do the trick and iwant to ask the distortion clear

    0
    krude
    krude

    8 years ago on Introduction

    Thanks for the great instructable. I was curious how it would sound when I saw it in MAKE. Now I definitely want one.