Introduction: The D2OP (Dark Owl's Oodammo Pistol)
Here it is! My first instructable. With these instructions, you'll be able to build my Oodammo Pistol as shown in my first forum topic: http://media.nbcmontana.com/community/DarkOwlKnex-Project-Update-One/
A no rubber band required trigger.
A high mag cap.
A comfortable handle (at least for me).
A friction lock magazine (See forum topic for further info).
This, at the moment, is my official sidearm. Have fun building if you do, and feel free to post a picture of your finished project. I will always try and help you with any problems you have when building this gun. Thanks for viewing!
Step 1: The Basic Internals
Step One: Just follow the pictures. This is pretty much the basic internals of the gun. After this you'll be encasing it, making it comfier, and adding on other necessary parts for the gun to function. Again, if you have any questions, feel free to ask.
Step 2: Encasing and Perfecting
Step Two: In this step, you'll encase the internals and make the gun comfier. Oh, and don't worry; there are only two more easy steps to go: an addition to the mag, and instructions on how to band and fire The D2OP.
Step 3: Odds and Ends
Step Three: In this step, you'll make a vital addition to the mag and a piece for the Oodammo to rest on while in the 'chamber' of the gun. All that's left now is banding the thing, making the ram, and the like!
Step 4: The Finishing Touches
Step Four: Just build what's shown and put the rubber bands on already!!! Also, a demonstration on how to load The D2OP is included.
1 Person Made This Project!
- ProtectTheAlphaWolf made it!