Temple: Adding Main Dome

Introduction: Temple: Adding Main Dome

Instructions

  1. Press W to choose the Workplane Tool and select the bottom surface of the pointed dome.
  2. Press CTRL+C to copy the pointed dome to the clipboard.
  3. Continue to the next step.

Step 1: Align Workplane to Center Cylinder

Instructions

  1. Press W to choose the Workplane Tool and select the top surface of the column.
  2. Press CTRL+V to paste a copy of the pointed dome on top of the column.

  3. If the dome is pointing down, rotate it so that it is pointing up.
  4. Continue to the next step.

Step 2: Scale the Dome

Instructions

  1. Scale the pointed dome to fit the large cylinder.
  2. Move as needed.
  3. Continue to the next step.

Step 3: Congratulations!

Congratulations!! You Finished!!

Be the First to Share

    Recommendations

    • Lamps Challenge

      Lamps Challenge
    • Puzzles Challenge

      Puzzles Challenge
    • CNC and 3D Printing Contest

      CNC and 3D Printing Contest

    Comments