Snow Pi RGB With Adafruit CLUE

Introduction: Snow Pi RGB With Adafruit CLUE

About: Retired teacher of computing - started 1967 with FORTRAN IV. I now play with development boards such as Raspberry Pi, Pico, Arduino, micro:bit and Adafruit CircuitPython boards like the Insybitsy M4 and Circui…

This Instructable introduces the Snow Pi RGB being driven by an Adafruit CLUE. You can also drive it with a Raspberry Pi or a Micro-Bit. It was a Kickstarter item but some more are still available from:

https://snowpi.xyz

The documentation and examples currently only cover the Raspberry Pi and micro:bit so I thought I would help by putting up an example using the CLUE and CircuitPython.

You attach the adaptor with the supplied 5 screws and nuts and then plug in the SnowPi.

Start the Mu editor and copy the following script into the editor. Save the script to the CLUE and the demo begins.

It shows the basic setup and numbers the RGB Neopixels. It includes winking eyes, a glowing nose, random colours on the belly button and rotating red and green pixels. You can obviously add additional code for more ambitious displays.

I hope you find it usefull.

Be the First to Share

    Recommendations

    • Anything Goes Contest

      Anything Goes Contest

    Comments