Introduction: Present's on Tinkercad
These presents are made on tinkercad. You can change the colors and mess around with them. This took me about 10 minutes to create all of them.
Step 1: Box of the Present
First make a square 20x20x20. Then put the radius to 2.64. The color doesn't matter so you can choose the color.
Step 2: Rapping Paper
Next duplicate one of the squares (to duplicate press Ctrl D). Next make 2 new squares that are holes. Put them on the side of it and group it together. For this I put mine white and sized it to 5.59 by 20.Next duplicate that and turn it 90 degrees.
Step 3: Present
Next group the Present and set the color to multicolor.
Step 4: The Bow
Go to the scribble tool and make a half oval.Then make it White and Duplicate it and turn it as desired.
Step 5: Putting the Present Together
Once you finish the bow group it all together. Thank you for your time I would appreciate it if you would give it a heart and leave a comment below.
Participated in the
Holiday Decorations Speed Challenge