Origami Among Us Figures

3,739

6

16

Introduction: Origami Among Us Figures

About: I am a lego and crafts enthusiast who is a major nerd. Yep. That's it.

-------------------------------------------------------------Papermate------------------------------------------------------

...........................................................There is 1 im-post-it among us............................................................

This is just a simple design I came up with for the heck of it. With the sudden surgence of among us stuff, and it having come out in 2018 (ikr), it only seems fitting that I try my hand at it.

Note: the one I used for demonstrating how to fold came out slightly less sharp in fold than the other one; you can probably tell which one is which.

Good luck, and may your folds be cleaner than mine!

Supplies

use literally ANYTHING besides construction paper for this.

Step 1: The Base

Start with a crane base and sink fold as shown.

Step 2: Starting to Take Shape

Fold the front and back exactly in half as shown. Flip sides, but do not repeat this step.

Step 3: The Visor

Fold the flap facing you so that about 1 quarter of the "pegs" behind it are showing. These will be the legs. Fold the flap you just folded down in half, then curl it into itself until you are satisfied with its size. Fold the top corners behind the visor, then fold as shown around the mask in the last image.

Step 4: The Backpack

This was the main bit I screwed over in the second model.

Fold the flap on the back up, as with the visor. Squash fold as shown (is this considered a squash fold?), then fold the sides in, similar to the visor. Open the pocket and squash open as shown. Fold the sides in around the backpack, not over the side of the figure. Fold the tip inside so that it lines up with the bottom of the body.

Fold in the top corners of the backpack and the figure's head. GENTLY (and this is where I screwed up) crease the backpack into a box.

Step 5: Finished

Crease the legs, one forward and one backward, so it can stand, and now there is an imposter among you.

1 Person Made This Project!

Recommendations

  • Anything Goes Contest

    Anything Goes Contest

16 Comments

0
4806839753
4806839753

1 year ago

hello my susy paper freind

AOh14GhXGQNFkl7pAHAlz-giPDAUPtgZJzb18X2OinD08Q=s96-c.jpeg
0
Witheredboi
Witheredboi

Reply 1 year ago

nice =]

0
moose0411
moose0411

1 year ago

awesome

0
Witheredboi
Witheredboi

Reply 1 year ago

Thank you =]

0
WackyPencil1
WackyPencil1

1 year ago

Started how no one knows

0
Witheredboi
Witheredboi

Reply 1 year ago

The craze? Yeah... I would say it was because of the release of the last Henry Stickman game though.

0
Witheredboi
Witheredboi

Reply 1 year ago

Thanks, so had I =]
A lot of the things I make are out of frustration that they do not already exist lol

0
Witheredboi
Witheredboi

Reply 1 year ago

No prob, glad it helped =D

0
Witheredboi
Witheredboi

2 years ago

If you need a step explained, please say so.

0
Impost8R
Impost8R

Reply 1 year ago

Hello, could you please share how to make the crane part so i can make the Among Us for my son. Thank you

0
Witheredboi
Witheredboi

Reply 1 year ago

It has been posted. Hope it helps