Introduction: Multipurpose Pencil Holder
This a multipurpose pencil holder that can also be used as a phone holder, a photo hanger, and more!
First, make and draw out a design for the pencil holder section. One design should be a building or a quadrilateral structure of some kind, as it would be easier to capture all four sides of the design that way. The other drawing should be a road as it is the base for the structure to be placed on, along with the other piece that will be added later on.
(Ps. The measurements can be adjusted to your likings, just make sure everything else is adjusted too)
After drawing out the cardboard measurements. Cut out both the paper designs and the cardboard and use the glue stick to stick the paper to the cardboard.
Use a glue gun to glue the cardboard pieces together. With the structure glued like a normal building should look without a roof and glue to one side of the base.
Now it’s time for the other accessories, first, draw a 2D street lamp on cardboard and glue it to another small piece of cardboard. Then glue that to the edge opposite to the pencil holder section.
Afterward, take a piece of twine and glue it to the top side of the pencil holder and the top of the street light. Then clip as many wooden pegs as you want on the twine.
Use the popsicle sticks to build a bench(use whatever style you please), then use a glue gun to glue it to the middle of the base.
Step 7: Finished!
Participated in the
Hand Tools Only Challenge