Introduction: Modern Mansion
Would you like to build this mansion? Well, go ahead to follow these directions.
Step 1: The Ground
Create a box 200 by 200 by 15 as shown in the picture.
Step 2: Create a Hole
Create a hole which would be for the pool.
Step 3: Tiles
Add some tiles around the pool in a square as shown for a professional look.
Step 4: Pool Complete
Add in a blue box to fill in the whole to create "water"
Step 5: Pillars
Add in 12 pillars 4 of them tall, and 8 half the size of the tall ones as shown in the pictures.
Step 6: Floor
Add in two blocks, one dark brown for the roof, and a light brown for the floor of the balcony.
Step 7: Pillar Adjustment
From the 4 tall pillars, raise the 2nd, 3rd, and 4th ones, and lower the 1st one as shown in the pictures.
Step 8: Pillars
Add two pillars in the front as shown in the diagram. Also, add a roof the same color as the lower roof.
Step 9: Balcony Railings
Add the brown railings as show for the balcony.
Step 10: Glass
Add some blue thin blocks to imitate glass.
Step 11: Panels
Remove the front panel to add a high stool and a middle couch from the OMSI hangout space.
Also I added 2 pool floaties in the water.
Step 12: Doors
Add some brown blocks as shown in the middle of the pillars to create doors.
Step 13: Garage
Create a Garage by adding multiple white blocks with a roof to shelter a car.
Step 14: Canopy
Create a canopy using 4 pillars, blocks, and a roof. Add some couches from the OMSI hangout space, including a round table.
Step 15: Car
That is the link for the car. Copy and paste it, and add it inside your garage. Then add a door to make it look like the garage is opening.
Step 16: AC
What is a home without an AC? Add one. Use a box, a cylinder with a hole, and a gear for the AC on the side of the house.
Step 17: FINISHED!
You are done! You can always add extra things.
Participated in the
Tinkercad Student Design Contest