Introduction: LED Light
Hello today I am going to show you how to make an LED light that can be turned on and off with a switch.
Step 1: Connecting the 9v Connector to the Battery
First you are going to need to connect the connector to the battery.
Step 2: Connecting the Wire to the Switch
Next you are going to take your wire and connect it to the middle circle
Step 3: Connecting the Red Wire From the Battery to the Switch.
In this step you are going to connect the red wire from the 9v battery to the switch.
Step 4: Connecting the Wires to the LED
Connecting the black wire from the 9v battery and the red wire from the switch to the LED.
Step 5: Finished Product
This is the finished product when you turn the switch on it should light up.