Knex Semi Auto Three Shot Rbg

Introduction: Knex Semi Auto Three Shot Rbg

About: ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⣀⣤⣤⣤⣶⣤⣤⣀⣀⣀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⣠⣴⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣶⣄⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⢀⣾⣿⣿⣿⣿⣿⡿⠋⠉⠛⠛⠛⠿⣿⠿⠿⢿⣇⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⣾⣿⣿⣿⣿⣿⠟⠀⠀⠀⠀⠀⡀⢀⣽⣷⣆⡀⠙⣧⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠀…

Pros
Easy to make
Easy to shoot
Looks good
Relatively sturdy
Okay power
True semi automatic

Cons
Only holds 3 rounds
Inaccurate
Clamp sometimes slips and lets out two bands

Step 1: Parts and Frame Beginning

Pretty self explanatory make a casing put blue rods in the designated places.

Step 2: Mechanism and Spacing

Put the mechanism inside. Easy step :)

Step 3: Casing Frame

Make

Step 4: Stabilizers

Put the two stabilizer arms on the blue rod that holds the trigger mechanism and attach them to the blue rod at the top of the gun.

Step 5: Rubber Bands and Firing

Make sure that one of the green rods on the ammo wheel is resting between the prongs on the lower trigger clamp.
To load just put he bands on the three open slots on the ammunition wheel and hook them onto the orange clip at the end, once the bands are on pull the trigger and fire a round,(tip, use a thick rubberband to pull the trigger) wait for the band to pull the trigger back and fire again

This is my first instructable, hope you enjoy!

please comment below.

Be the First to Share

    Recommendations

    • CNC and 3D Printing Contest

      CNC and 3D Printing Contest
    • Puzzles Challenge

      Puzzles Challenge
    • Lamps Challenge

      Lamps Challenge

    Comments