How to Use a Real-Time Clock Module (DS3231)

Introduction: How to Use a Real-Time Clock Module (DS3231)

The DS3231 is a low-cost, extremely accurate I2C real-time clock (RTC) with an integrated temperature-compensated crystal oscillator (TCXO) and crystal. The device incorporates a battery input and maintains accurate timekeeping when main power to the device is interrupted.

Supplies

Step 1: Install Battery

The battery input is 3V and a typical CR2032 3V battery can power the module and maintain the information for more than a year.

Step 2: Connection

Wiring the RTC module is pretty straightforward!

VCC -> Arduino 5V
GND -> Arduino GND
SCL -> SCL or A5
SDA -> SDA or A4

Step 3: Library

Arduino library for the DS3231 real-time clock (RTC) can be installed directly in Library Manager.

Step 4: Setting Up the Clock

The clock is most likely set to 1 January 1970 initially. If you need real-time in your projects, synchronize this RTC with your computer.

Looked into the DS3231_set example from the DS3231 library and it seems like it expects a date sent in this format YYMMDDwHHMMSS, with an 'x' at the end.

Few lines of Python code using pyserial and ntplib should get time from the time server and send a string to Arduino.

Step 5: Test RTC

In library, examples find DS3231/echo_time.ino. Upload it to Arduino and you should see time printed in serial monitor.

Be the First to Share

    Recommendations

    • CNC and 3D Printing Contest

      CNC and 3D Printing Contest
    • Lamps Challenge

      Lamps Challenge
    • Rice & Grains Challenge

      Rice & Grains Challenge

    Comments