How to Make a Quesadilla

Introduction: How to Make a Quesadilla

Note: This guide is not to learn how to cook, rather, getting familiar with a key to everything that is food, being the stove/oven. This is a basic dish I believe anybody can make. Very easy and very tasty.

Supplies

You will need

A Stove/Oven

A flat pan

Tortillas (Could be Corn or Flour)

Pre-Sliced Cheese (Could be of your choice, but I'll use Kraft Singles)

And A Spatula

Step 1: Setting Up the Ingredients and Grill

Place all of your gathered materials and set it on the side. Place the flat pain above the stove, and set the stove to low heat. Let it sit for 5-10 minutes.

Step 2: Placing the Tortillas

As the grill reaches it's highest temperature, using the spatula, carefully place a tortilla onto the spatula. Slide the tortilla down the spatula onto the heated flat pan. Repeat this step for the other tortilla.

Step 3: Heating the Tortillas

As the tortillas heat up (around 1 minute), carefully use the spatula and flip the tortilla on its other side onto the heated pan. Repeat this process with other tortilla, as well as for 2-3 times.

Step 4: Placing the Cheese

With the pre-sliced cheese you have selected, place a slice of cheese onto the tortillas. Let it sit for 30 seconds for cheese to melt.

Step 5: Placing the Heated Tortilla on the Cheese

Now that the cheese is at it's melted texture, using the spatula, flip the tortilla onto the other tortilla with cheese. Let it sit for 30 seconds, and repeat until desired times.

Step 6: Enjoy!

Now with a plate, using the spatula, place the quesadilla onto the plate to cool down for approx. 2-3 minutes. Now, you have a delicious quesadilla to enjoy! Repeat this whole guide to make more quesadillas as well!

Step 7: Note

As previously stated, this Guide is not to learn how to cook, but rather, it is to get familiar with the oven, which is a major factor in cooking, hence the name.

Be the First to Share

    Recommendations

    • Rice & Grains Challenge

      Rice & Grains Challenge
    • CNC and 3D Printing Contest

      CNC and 3D Printing Contest
    • Lamps Challenge

      Lamps Challenge

    Comments