How to Make DIY Music Reactive RGB LED Strip WS2812B || Music Visualizer With Arduino

Introduction: How to Make DIY Music Reactive RGB LED Strip WS2812B || Music Visualizer With Arduino

it basically take the sound input from surrounding and give the raw analog value of sound signal to Arduino . in Arduino we have to set the color for different signal range . when it play you see the real music visualizer in front of you.

Step 1: 1. INTRO

How to build reactive led using Arduino and sound sensor/microphone .

it basically take the sound input from surrounding and give the raw analog value of sound signal to Arduino . in Arduino we have to set the color for different signal range . when it play you see the real music visualizer in front of you.

Step 2: 2. REQUIREMENT

1.5v 5amp adaptor

2.arduino

3.sound sensor/microphone module

4.WS2812B RGB pixel led strip

5.jumper wire.

Step 3: 3. CIRCUIT DIAGRAM

MAKE THE ALL CONNECTION AS THE GIVEN CIRCUIT DAIGRAM.

CONNECT DATA PIN OF RGB STRIP WITH ARDUINO DIGITAL PIN AS DISCRIBE IN THE DIAGRAM.

Step 4: 4. UPLOAD THE CODE IN ARDUINO

UPLOAD THE ABOVE SOURCE CODE INTO THE ARDUINO .

Step 5: 5. ENJOY THE REACTIVE RGB LED WITH EFFECTS.

SEE THE FULL VIDEO FOR DETAIL

Be the First to Share

    Recommendations

    • Lamps Challenge

      Lamps Challenge
    • CNC and 3D Printing Contest

      CNC and 3D Printing Contest
    • Rice & Grains Challenge

      Rice & Grains Challenge

    Comments

    0
    Vishalshaw
    Vishalshaw

    1 year ago on Step 4

    Can we use ws2811 pixel led for this project