Graded Card PSA BGS Frame for Pokemon

2,197

Introduction: Graded Card PSA BGS Frame for Pokemon

This instructable will show how to make a frame for your graded cards. They should fit PSA/BGS and other cases like 1/4 in screw downs. You can also customize it to fit one-touch cases.

Youtube video:

Step 1: Supplies

Foam Board

Get from Michaels/Walmart/Hobby Lobby

1/4" screw down cases
https://amzn.to/31YVg4K

One-touch magnetic cases
https://amzn.to/35SlpD5

MCS 16x20 Inch Collector Card Wall Display, Holds 20 Sports Cards, Black
https://amzn.to/3kL10X5

Ribba Frame, black 19 ¾ x 9 inch (50x23cm)
https://www.ikea.com/us/en/p/ribba-frame-black-603...

Ribba Frame, black 11 ¾x34 ¾ inch
https://www.ikea.com/us/en/p/ribba-frame-black-803...

Step 2: Measure and Cut Foamboard

Every picture frame will be different so measure accordingly. if you're using the same Ribba frame is me, then use the measurements shown in the photos.

Step 3: Finish

Put everything together and you have a frame. Check out my video for more detailed steps.

Youtube video:


Be the First to Share

    Recommendations

    • Rice & Grains Challenge

      Rice & Grains Challenge
    • CNC and 3D Printing Contest

      CNC and 3D Printing Contest
    • Lamps Challenge

      Lamps Challenge

    Comments