Forked Drop-Down Longboard




Introduction: Forked Drop-Down Longboard

How to make a drop-down longboard using only simple woodworking tools?

The traditional technology of making a drop-down longboard requires a veneer pressing process. So it requires a special equipment. I offer to make a sectional longboard using flat plywood sheets with an optimized drop-down parts design. I described the principles in the following articles:
Forked drop-down longboard
Combined drop-down longboard

Step 1: Gather Tools and Materials

To complete this project you will need the following materials and stock parts.

  • 15mm (11 ply) Baltic birch plywood
  • 12mm (9 ply) Baltic birch plywood
  • Wood stain and varnish
  • 180 mm (7") longboard trucks
  • 65-70mm longboard wheels
  • M5 (US #10-#12) bolts washers and nuts.

I recommend using the Caliber 184/50 or Slant 180/50 trucks for this design.

Required tools

  • Jigsaw with blades for plywood or laminate
  • Clamps
  • Electric drill with 5mm (US #12) bits
  • Drill mount sanding disk or another sanding tool
  • Sandpaper Scissors
  • Glue stick
  • Electric handheld router (optional).

Step 2: Download Project Files

Download project files from the Thingiverse site or the GrabCAD site. The main file you need is the Forked_Drop-Down_Longboard.dxf drawing.

Step 3: Cut Plywood Parts

Print part plans from the Forked_Drop-Down_Longboard.dxf file with the 1:1 scale. Glue them on the plywood sheets. Then cut the parts using jigsaw. Make the main platform of 15mm plywood and nose/tail parts of 12 mm plywood.

Step 4: Finish Plywood Parts

Remove paper plans from the plywood parts with a wet sponge and dry the parts. Refine part edges with sandpaper disk and electric router. Sand part surfaces with sandpaper.

Color parts with wood stain and then coat them with acrylic or yacht varnish.

Step 5: Assemble the Longboard

Mount trucks to the nose and tail parts. Attach these assemblies to the main platform. Don't forget to put washers under bolts and nuts. Optionally you can put washers between nose/tail parts and the main platform to adjust the platform drop level. Attach wheels.

All is done! The longboard is ready to ride.

Be the First to Share


    • Rice & Grains Challenge

      Rice & Grains Challenge
    • Puzzles Challenge

      Puzzles Challenge
    • Lamps Challenge

      Lamps Challenge


    Nico Contreras
    Nico Contreras

    6 years ago

    I cant open the files

    Sin título.png

    Reply 6 years ago

    You need a CAD program. I use QCAD. It is freeware.

    You have gave me an idea to publish plans as PDF files. However, CAD programs are more convenient to print multi-page drawings anyway.

    Nico Contreras
    Nico Contreras

    Reply 6 years ago

    Thank you! I'll download QCAD

    Greetings from Argentina

    DIY Hacks and How Tos

    Nice. I like homemade boards because I can make them as strong as I want.


    Reply 6 years ago

    Thank you, Jason!