Introduction: Felt Earbud Travel Case
A simple case for your earbuds. This case prevents the wires from being tangled, in a stylish and practical way.
*Note: Updated photos*
- Thread or embroidery floss
- Sewing needles or a sewing machine
Step 1: Cut the Felt
Cut two felt pieces to a diameter of 3 inches, which is a radius of 1.5 inches. You can use a compass or a ruler to help outline two perfect circles.
Step 2: Make the Opening
Use your scissors to slowly make a cut that runs vertically along the face of one of the felt pieces. Be careful to not cut all the way through the felt, so you leave a little seam clearance.
Step 3: Sew It Together
Take your two felt pieces and sew them together so they form a pouch.
Step 4: Finish It Off
Cut the thread or embroidery floss off and add in your earbuds. Enjoy!
Participated in the
Sew Tough Challenge