DIY FOOT SANITIZER

Introduction: DIY FOOT SANITIZER

HELLO MY NAME IS AADITYA AND I AM 14.
I AM IN 9TH GRADE. AND I HAVE DESIGNED A FOOT SANITIZER. I THOUGHT OF AN IDEA THAT EVERYONE WASHES THEIR HAND BUT THEY NEVER WASH THEIR FOOT PROPERLY. SO I DESIGNED THIS PROJECT.

Step 1: Body

I HAVE DESIGNED THIS 3D MODEL IN AUTODESK TINKERCAD.

Step 2: CIRCUIT

HERE I HAVE USED A PROXIMITY SENSOR TO CONTROL THE PUMP.
COMPONENTS:
"PROXIMITY SENSOR"
"DC PUMP"
"1K RESISTOR"
"TIP 32C"
"USB CABLE"

Step 3: SPRINKLER

LAST STEP IS TO ADD THE SILICON PIPE AND CONNECT THE NOZZLE.

Step 4: COMPLETED

AFTER THE PREVIOUS STEP THE PROJECT IS COMPLETE.
THE ABOVE PICTURE IS FOR AUTHENTICATION.

NOTE:DUE TO LACK OF TIME I WAS NOT ABLE TO MAKE THE CASE OF THE PROJECT.
PLEASE CONSIDER....

"Can't Touch This" Family Contest

Participated in the
"Can't Touch This" Family Contest

Be the First to Share

    Recommendations

    • Lamps Challenge

      Lamps Challenge
    • Rice & Grains Challenge

      Rice & Grains Challenge
    • CNC and 3D Printing Contest

      CNC and 3D Printing Contest

    Comments