Catapult Instructions(School)

Introduction: Catapult Instructions(School)

This is the cataplt me and my team came up with to conserve recources

Step 1: the Instructions in Words

When i say 2 feet i mean 1 so keep that in mind when cutting the wood

Take 2 2x4x6 and attach them to 2x4x2 at the corners using nuts and bolts

Secure the other 2x4x2 the same way on the opposite side as shown in drawings Secure a 2x4x5 vertically 1.4 inches away from the edge (refer to image). Drill a hole 2-3 inches above the base of the catapult and copy on the other side.take 47 ft of rope and fold it by 3 ft like a paper fan.run the rope through the hole and secure the rope using the knot in the diagram at the to of the page.

Step 2: IMPORTANT INFORMATION/UPDATES

When i say 2 feet i mean 1 so keep that in mind when cutting the wood

The rope will be secured by useing the knot diagram and the throwing arm should be set in at a 80 degree angle,the breaks will be 9 cm behind the tortion rope.

2x4x6 (2 wood studs) 2x4x2 (2 wood studs) 2x4x5 (2 wood studs) ½ inch pvc 6 feet ½ inch pvc 2 feet Assorted Nuts and bolts Lag screws 1 plastic cup 47 ft of rope 3 ft of rope

Be the First to Share

    Recommendations

    • Rice & Grains Challenge

      Rice & Grains Challenge
    • Lamps Challenge

      Lamps Challenge
    • Puzzles Challenge

      Puzzles Challenge

    Comments