Introduction: Carpenter Bee Trap | Tutorial
Welcome to the carpenter bee trap tutorial!
The funny/sad thing about this one is that the mason jar I have here was originally holding locally sourced honey... and now I'm using it to trap bees. Okay, maybe not funny - just sad!
But this is necessary - my workshop has been overrun and I tried spraying vinegar and leaving out sliced cucumber and none of that worked originally.
If you want to watch the full video or check out more content like this, please check out my YouTube and consider subscribing!
Let's get into it!
4x4 Piece of Wood - about 10"
Wire for Hanging
Step 1: Drill Main Hole
To begin, drill out a 1/2 inch hole down the center.
This will only need to be about 4 to 5 inches. Just a rough estimate - none of this has to be perfect.
Step 2: Drill Entrance Holes
About 1 inch from the bottom of the wood, drill more 1/2 inch holes BUT this time drill them at an angle that meets towards the end of the main hole.
This is actually much easier than it sounds - I landed all of my holes without error on the first try.
Do this step on all 4 sides of the 4x4 so there are multiple entrances for the bees.
Step 3: Prepare Mason Jar
Next, you'll want to get your mason jar.
This next step is optional but I decided to add some sugar to my trap (I'm not even sure if carpenters are really into this kind of thing but they're bees right?). Now I say this is optional because the design of the trap alone is known to attract carpenter bees, and adding the liquid adds a death sentence to the bees.
If you decide to not use any sugar/liquid, you can trap the bees and release them somewhere else.
Step 4: Fasten Mason Jar
Place the lid at the bottom of the trap and drill out a 1/2 hole on top of where your hole was already made in the wood.
Then screw on the lid (I used 4 screws here).
And now you can turn this trap upside down and screw on the mason jar.
If you decide to hang this trap, simply drill a small hole through the top portion of this 4x4 and get a coat hanger or some wire to fasten it around a tree branch. I personally just set mine in a window flower pot.
Step 5: Enjoy Your Safety
And that's all there is to it. Enjoy your peaceful backyard once again and take control!
If you like this project, please consider subscribing to my YouTube channel - you'll be able to catch a lot more videos similar to this.
Thank you so much!
Participated in the
Mason Jar Speed Challenge
1 Person Made This Project!
- SP Riley made it!