Introduction: Advanced Engineering Design Apparatus
The purpose of this apparatus is to reduce the amount of contact people come into at checkout and places where people often have to use the same device to purchase items. With this stylus, you are able to buy items without the worry of catching germs through other peoples nasty bacteria hands.
Clear or masking tape
Bottle cap with water
Step 1: Unscrew Cap or Bottom on Pen and Take Out the Ink Chamber Along With the Spring
Screw back on the top or bottom on the pen (Inside of the pen should be EMPTY !!)
Step 2: Cut Cotton Swab in a Diagonal Motion, for Better Fit in Hole
Step 3: Insert the Pointed End of Cotton Swab in the Tip of the Pen
Step 4: Grab a Piece of Tape and Secure the Cotton Swab
Step 5: Cut a Piece of Aluminum Foil, About the Size of Your Thumb
Step 6: Wrap Around Pen So That One End Touches the Cotton Swab
Step 7: Take a Couple Pieces of Tape and Secure the Top and Bottom of the Foil to the Pen
DON’T soak cotton swab in water, lightly dip the cotton swab into the cap with water
Make sure your fingers are on foil while in use after the cotton swab is dipped
Begin the germ free usage of pin pads !!!