Aduino 16x2 Lcd Custom Char. Clock

Introduction: Aduino 16x2 Lcd Custom Char. Clock

If you want to make a DIY project

so it's perfect for you

and you also gift it to someone



>LCD 16x2

>Arduino UNO, nano

>atmega 3128p

>3x 10k resistor

>drill pcb

Body of clock

>ice cream stick

>hot gun with glue

>push switch x3


Step 1: Watch This Video

my channel

Step 2: Body of Clock

I'm using ice-cream stick

which I cut in this size and glue them

Step 3: Schametric Digram

these connection are as follows

the 10k pull-down resistor is used on the input

pin 10 ,9 ,8

Step 4:

for it making small I use atmega 328p

direct on pcb and the last i glue all the components and glue it is places

Step 5: Code

this is a simple code but not perfect. I future I make it perfect one

Be the First to Share


    • Puzzles Challenge

      Puzzles Challenge
    • CNC and 3D Printing Contest

      CNC and 3D Printing Contest
    • Rice & Grains Challenge

      Rice & Grains Challenge


    Penolopy Bulnick
    Penolopy Bulnick

    2 years ago

    Thank you for sharing your clock :)


    Reply 2 years ago

    hi penolopy this is my Ist project
    thanx for liking it